Studio Gt Features - Samson Studio GT Manual De Instrucciones

Here is a look at some of the unique features of the Studio GT studio monitor system with
:
USB audio interface
•
Two-way, active studio reference monitor with ported tuned enclosure providing
extremely accurate monitoring for recording studio, post-production, video
gaming and multi-media applications.
•
Integrated two-channel USB audio interface provides the ability to connect a
microphone, line, or instrument signal to record directly onto your digital audio
workstation.
•
Onboard high quality 16-bit 44.1kHz/48kHz D-to-A (digital-to-analog) and A-to-D
(analog-to-digital) converters.
•
Two combination XLR/¼" mic and instrument/line inputs.
•
2-position switch for no-latency direct stereo and mono monitoring.
•
To listen to your mix on headphones, there are two 1/8-inch stereo headphone
outputs with individual level controls. The internal speakers automatically turn off
when you plug into the right Headphone output.
•
For tight and controlled low frequency response, the Studio GT employs a
4.25-inch custom designed, inverted cone, copolymer woofer with santoprene
surround.
•
The Studio GT's 1-inch silk dome high frequency driver is set in a custom designed
wave guide, producing a high frequency response that's accurate and natural.
•
You can connect a second stereo input from an MP3 player, keyboard, sound card
or any other stereo line level signal to the Studio GT rear panel's stereo RCA or 3.5
mm stereo Aux Input jack.
•
Stereo Class D internal power amplifier.
•
Passive crossovers utilizing a multi-pole design for linear response from bottom
to top.
•
Solid MDF (Medium Density Fiberboard) construction provides maximum SPL.
•
Precision-tuned rear vented enclosure, attractively finished in black satin vinyl
covering.
•
2 meter, 20-gauge speaker cable and USB cable included.
•
Includes Cakewalk® Sonar LE music production software.
Owner's Manual

Studio GT Features

Studio GT
7