Servicing Your Snowthrower; Maintenance Safety; Maintenance Schedule - Honda HS550E Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
SERVICING YOUR
SNOWTHROWER
Proper maintenance is essential for safe, economical, and
trouble-free operation. It will also help reduce air pollution.
WARNING
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner's manual.
To help you properly care for your snowthrower, the following pages
include a maintenance schedule, routine inspection procedures, and
simple maintenance procedures using basic hand tools. Other service
tasks that are more difficult, or require special tools, are best handled
by professionals and are normally performed by a Honda technician
or other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your snowthrower under severe conditions, consult your
servicing dealer for recommendations applicable to your individual
needs and use. Remember that your servicing dealer knows your
snowthrower best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, genuine
Honda parts or their equivalents for repair and replacement.

MAINTENANCE SAFETY

Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
WARNING
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
owner's manual.
Safety Precautions
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust.
Operate outdoors away from open windows or doors.
• Burns from hot parts.
Let the engine and exhaust system cool before touching.
• Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.

MAINTENANCE SCHEDULE

1
Interval
Check the engine oil level
Before each use
Check-adjust scraper blade
First month or
Change the engine oil
25 hours
Every year -
Change the engine oil
Check-adjust the spark plug
Before operation
Check-adjust the auger clutch lever freeplay
Check auger paddles
Check-adjust the scraper blade
Every year -
Check-adjust the spark plug
Apply oil to moving parts
Before storage
Drain the fuel tank and carburetor
Every 100 hours
Check-adjust the spark plug
Adjust the engine speed
Adjust the valve clearance
Every 150 hours
Replace the spark plug
Clean the fuel tank and filter
Every 2 years
Check the fuel line and replace if necessary
1. For professional commercial use, log hours of operation to
determine proper maintenance intervals.
2. These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
ENGLISH
Item
(page 8)
(page 10)
(page 8)
(page 8)
(page 9)
(page 9)
(page 9)
(page 10)
(page 9)
(page 12)
(page 11)
(page 9)
2
2
(page 9)
2
2
7

Publicidad

Tabla de contenido
loading

Tabla de contenido