1. SAFETY INSTRUCTIONS
Important !
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user.
Warning :
• The different elements can only be dismantled by an authorised technician.
Safety instructions :
• To safety use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary.
2. DESCRIPTION
(fig 1)
1 • Monitor
2 • Wall mounting
3 • Mains adapter
4 • Outdoor station
5 • Rain Shield
Generality
This videophone consists of an interior unit with a colour, liquid crystal display screen, a free hand interphone, and
a surface-mount exterior outdoor station which makes it possible to see and speak to the visitor who as rung. To
make the most of the videophone, please take the time to read this instruction manual thoroughly, and do not
lose it.
3. COMPONENTS
a. Monitor
(fig. 2)
1. Communication with the road side panel after a call.
2. Monitoring or image resume key.
3. Key used to cut off the call
4. Control of a strike or electrical lock (12 V
output at the rear of the camera).
5. Control of outdoor lighting system via a 12 V switch (12 12 V
output at the rear of the monitor).
6. Control of an automatic gate opener. (contact without current at the back of the camera).
7. Indicator of a call from the roadside panel DOOR PHONE (green)
8. Indicator of silent ring tone and indoor melody.
9. Colour adjustment.
10. Brightness adjustment.
11. Ring tone volume adjustment.
12. Selection of the ring tone (1. Ding Dong, 2. S.A.C) or 0. Silent (switching off ring tone and indoor melody)
13. 7" colour screen (18 cm).
14. Microphone to communicate with the roadside panel.
15. At the rear of the monitor, outlet for the 15V
plug of the adapter (adapter to connect to an installation
compliant with standards in force: NFC 15-100 for France).
CFI EXTEL WEVP 252
- 12/2011
.2
GB2