Steren WR-906UHF Manual De Instrucciones página 32

7. Open the battery compartment in the microphone and place 2 new AA
alkaline batteries, paying attention to polarity.
OFFP WR OFFP WR
LOWB AT LOWB AT
ON ON
MUTE
MUTE
8. Place the power switch at on position. The RF LED will
light up.
9. Talk over the microphone, slowly, adjust the volume
level until you hear the required level.
LOWB AT
10. If the volume level is too loud, the red peak LED will light up in the
receiver. Set the volume level.
14