Denon DJ SC5000M PRIME Guia Del Usuario página 17

•
Platter Play/Pause Behavior: This setting will determine how quickly your track starts to play. When set
to Normal, the track will play in relation to the motor start-up speed. When set to Instant, the song will
begin playing immediately, and the motor and platter will catch up to the song within a few milliseconds.
•
Default Loop Size: This setting determines the default size of an auto loop when you load a new track to
the deck: 1, 2, 4, 8, or 16 beats.
•
Smart Loops: This setting determines whether or not a manual loop will be automatically expanded or
reduced to a conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off.
This setting works independently of the quantization setting.
•
Time Format: This setting determines whether or not pitch adjustment affects how the track time is
displayed. When set to Static, the track's time corresponds to locations in the track as usual; adjusting
the pitch does not affect it. When set to Dynamic, the track's time will automatically adjust to account for
changes in pitch. For instance, if you set the pitch fader to -8%, the track time will increase so it is 8%
longer.
•
Track End Warning: This setting determines how long before the end of a track SC5000M will warn you
that it is nearing the end. If the track is on the currently selected layer, the platter ring and track overview
will flash. If the track is on the opposite layer, the Layer button will flash.
•
On Air Mode: This setting changes the platter ring illumination when the channel fader on the X1800
mixer is up or down, indicating an active or "on air" deck. When this setting is On, raising the channel
fader will change the platter color from white to the selected color. When this setting is Off, the user-
selected color will always be shown regardless of the channel fader position.
Note: This requires an X1800 connected via Ethernet.
•
Lock Playing Deck: This setting determines whether or not you will be able to load a track to the deck as
it is playing. Select On or Off. When this setting is on, the deck must be paused in order to load a track to
it.
•
Needle Lock: This setting determines whether or not you can tap the track overview in the display to jump
to that location in the track during playback. Select On or Off. You can use the track overview while
playback is stopped regardless of this setting. Alternatively, if Needle Lock is On and Motor is On, stopping
the platter with your hand or palm will allow you to swipe through the track overview.
•
Pad Lock: This setting determines whether the pads and pad mode buttons (Hot Cue, Loop, Roll, Slicer)
are enabled or disabled. Select On or Off.
•
Key Notation: This setting determines how the track key is notated in the display. You can view the key
as all Sharps, all Flats, Open Key, or Camelot.
•
Key Filter: This setting determines whether the Key filter shows tracks with the same key only (Match) or
tracks with compatible keys (Compatible).
•
BPM Range: This setting determines the lowest- and highest-possible BPM values that will be used when
tracks are analyzed: 58–115, 68–135, 75–155, 88–175, or 98–195 BPM.
•
BPM Filter Tolerance: This setting determines the "tolerance" of the BPM filter so you can include tracks
with tempos that are within a small range of the selected tempo. Select +0, 1, 2, 3, 5, 10, or 15.
•
Show Only File Name: This setting determines if you will view tracks by their file names instead of by
their metadata (tags). Select On or Off.
•
Deck Layer Colors: These settings determine the colors of the light ring around the platter for each layer
on each player. Tap the arrow next to A or B to select the layer, and then tap a color to select it. The light
ring will change color immediately. Tap the X to return to the previous screen.
Utility
To open the Utility screen, press and hold View/Preferences/Utility and then tap the Utility tab.
To close the Utility screen, tap the X in the upper-right corner.
In the Utility screen, swipe up or down to scroll through the options, and tap an option to select it:
•
Player #: This setting determines the number of this player. When selecting a source device to browse,
this number is shown next to the device name in the display.
•
Layer B: This determines whether this SC5000M Prime will use both deck layers (On) or just one (Off).
•
Screen Brightness: This setting determines the brightness of the main display: Low, Mid, High, or Max.
•
Model: This is the product name.
•
Firmware Version: This is the current version of the unit's Engine Prime operating system.
•
SC5000M Controller: This is the current version of the unit's controller firmware.
•
Update Firmware: Use this option to restart SC5000M Prime in Update Mode, which enables you to
update its firmware. Follow the firmware update instructions included with the firmware update package
you downloaded.
17