How To Install Batteries (Optional); Instrument Self Test; Calibration - MACHEREY-NAGEL URYXXON Relax Manual De Instrucciones

®
Manual URYXXON Relax
Pic. 13: Printer C Pic. 14: Printer D
Unroll the paper roll by 5 cm and place the roll in the paper compartment with
the end on the lower side. Fix the end of the paper to the housing with your finger
while closing the flap (Pic. 13 + Pic. 14).

3.8. How to install batteries (optional)

®
The URYXXON Relax can be operated with 6 type AA batteries independent
of the mains supply. The battery compartment is on the underside of the equip-
ment. Notice the designated polarity (+/-) marked on the battery compartment
while inserting the batteries.
Pic. 15: Battery compartment

3.9. Instrument self test

The instrument will perform an automatic self test each time it is turned on. If
an error message appears, the instrument will not start measurements. In this
case, please contact your local service provider.

3.10. Calibration

The instrument will perform an automatic calibration each time a test is run.
74
®
Manual URYXXON Relax EN, V6.00 / 11.20