Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PAiriNg

Pairing is the process of introducing your headset to your phone. Before
using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you need to pair your headset with your phone only once.
To see a demo of the pairing process, visit www.plantronics.com/easytopair.
QuICkPaIr™ TECHNOLOGy
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes into
pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
1.
Turn ON the
Bluetooth feature on your phone.
2
TIP:
For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone's user guide for more information.
2.
Press and hold the call control button to turn on your headset. (The indicator
flashes red/blue to show that the headset is on and in pairing mode.)
TIP:
If you don't see the red/blue flash, press and hold the call control
button to turn your headset off, and then press and hold the call control
button again until you see the red/blue flash.
3.
Use the commands on your phone to locate your headset.
TIP:
For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 8XXPlantronics. See your phone's user guide for more information.
4.
When prompted for the passkey, enter 0000.
When pairing is successful, the red/blue indicator on your headset turns off.
Your headset is now connected and ready to use.
6
3
1
Plantronics Voyager 815
4

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Voyager 815

Tabla de contenido