Pairing Your Headset; How To Pair Your Headset With Your Phone For The First Time - Plantronics Voyager PRO Guia Del Usuario

Pairing Your Headset

Before using your headset for the fi rst
time, you must pair it with your Bluetooth
enabled phone. Your new headset includes
Plantronics QuickPair ™ Technology to simplify
the Bluetooth setup process. The fi rst time
you turn your headset on, your headset
automatically enters pairing mode for 10
minutes. Once paired successfully, your
headset stays on for instant use.
If not successfully paired after 10 minutes, your
headset automatically powers off. When you
turn the headset on again, it automatically goes
into pairing mode until successfully paired with
a Bluetooth phone.
NOTE This headset is equipped with Secure
Simple Pairing (SSP). If your phone supports SSP,
you will not need to enter a Passkey (PIN code).
4
How to Pair Your Headset with Your
®
Phone for the First Time
1
Turn on your phone's Bluetooth feature.
For most phones, select Settings/Tools >
Connections > Bluetooth > On. See your
phone's user guide for more information.
2 Turn the headset on.
Press and hold the power button until the
indicator LED fl ashes red/blue. The headset
is now in pairing mode.
If you don't see the red/blue fl ash, press and
hold the power button to turn your headset
off, and then press and hold the power
button again until you see the red/blue fl ash.
3
Use the commands on your phone to
locate your headset.
For most phones, select Settings/Tools >
Devices > Bluetooth > PROPlantronics.
See your phone's user guide for more
information.
4 If prompted for the Passkey (PIN code),
enter 0000.
Pairing is successful when the indicator on
your headset fl ashes blue. Your headset is
now connected and ready to use.
NOTE To pair your headset with an additional
phone, turn on the phone then repeat steps 2
through 4.
Pairing Your Headset
1
2
BLUETOOTH BLUETOOTH
Discover/
Search 3
PASSKEY
4
0000
5