Description Of The Kit; Safety Notices; Optional Module Description - WEG SSW-07 Guia De Instalacion

1. DESCRIPTION OF THE KIT

Contents:

2. SAFETY NOTICES

ATTENTION!
Switch off the Soft-Starter SSW-07/SSW-08 before installing the Local
Keypad Kit.
The electronic boards have components that are susceptible to
electrostatic discharge. Never touch any of the electrical components
or connectors without following the proper grounding procedures. If it
is necessary to do so, touch the grounded heatsink or use a suitable
grounded wrist strap.

3. OPTIONAL MODULE DESCRIPTION

The Local Keypad is connected directly to the Soft-Starter. It is fitted into the
front cover slot for optional plug-in modules.
NOTE!
The Keypad parameter programming must be done according to
the SSW-07/SSW-08 programming manual that is available on the CD that
comes with the Soft-Starter or at WEG's website (www.weg.net).
2
Table 1 - Contents of the Kit
SSW-07/SSW-08 Local Keypad kit (Part number: 10194167)
Quantity
1 Local Keypad optional plug-in module
Description