Gewiss JOINON Serie Manual De Instalacion Y Uso página 70

Gewiss
Code Error description
The I/O remote control is no
Error 9 longer communicating with the
electronic card
Station The electronic card is not receiv-
switched ing the power supply needed in
off order to work
In the case of products connected to the JOINON platform and the "maintenance package in case of necessity" has
been purchased, is necessary contact the toll-free number 800 123 325.
In all other case when the technical support is needed, contact the GEWISS SAT technical assistance service.
70
Solution
Check the connection of the
Modbus line
Check the power supply to the
I/O remote control
Check the I/O remote control is
working properly
Check the correct numbering of
the component on the Modbus
line
Check the power supply up-
stream of the station.
Check the circuit breaker pro-
tection in the board (to protect
the electronic card) is working
properly.
Check the 12V power supply
unit of the electronic card is
working properly.
Faults and troubleshooting
Position
7.55.4.502.0 - Installation and Operation Manual