Identification Of Symbols; Know Your Machine - Husqvarna weed eater WE14T Manual De Instrucciones

a WARNING! This power tool can be
dangerous! Careless or incorrect
use can result in serious or fatal
injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
• Always wear hearing protection and
safety glasses marked Z87.
• Always wear face or dust mask if
operation is dusty.
Always wear heavy, long pants, long
sleeves, boots, and gloves.
Secure hair above shoulder length.
Electrical shock
See Fig. 1
1. Upper handle
2. Trigger
3. Lower handle
GENERAL POWER TOOL SAFETY WARNINGS
a WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term power tool in the warnings refers to your electric
(corded) power tool or battery-operated (cordless) power
tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.

IDENTIFICATION OF SYMBOLS

Keep children, bystanders,
and animals away from
work area a minimum of
30 feet (10 meters) when
starting or operating unit.

KNOW YOUR MACHINE

SAFETY
To reduce the risk of electric shock,
unplug before cleaning or servicing.
Remove plug from the mains
immediately if the cable is damaged or
cut.
Rocks or debris can ricochet or be
thrown into eyes and face and cause
blindness or other serious injury.
Do not expose to rain.
Use only specified trimmer head, spool,
and recommended trimmer line. Never
use blades, flailing devices, wire, rope,
string, etc. This attachment is designed
for line trimmer use only. Failure to follow
these instructions may result in serious
injury.
Double insulated
4. Shaft
5. Power cord
6. Guard
7. Cutting module
8. Plant and tree guard
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with grounded power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
5