Key To Symbols; Symbols - Husqvarna 525ECS Manual De Instrucciones

Symbols

WARNING! Edgers can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others. It is extremely important that
you read and understand the contents
of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Wear a protective helmet where
there is a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
Warning for rotating blade. Keep
hands and feet clear.
Warning! The blade continues to
rotate even after the engine has
stopped. When the engine has
stopped, stop the blade from rotating
by letting the blade come in contact
with the ground.
The operator of the
machine must ensure,
while working, that no
persons or animals
come closer than 15
meters (50 ft.).
Arrows which show limits for handle
positioning.
Always wear approved protective
gloves.
2 – English

KEY TO SYMBOLS

Wear sturdy, non-slip boots.
Air purge
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
10000
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
1157435-49 Rev. 3 2016-11-09