Repeat Play; Program Play - Hitachi CX-V3 Manual De Instrucciones

All manuals and user guides at all-guides.com
English

Repeat Play

Repeating one Track
1. Press or to select a desired track.
2. Press RPT button of remote control until "REPEAT 1" appears on the display. The
selected track plays repeatedly.
Note: To cancel this function, press RPT until "REPEAT 1" disappears from the display.
Repeating the Disc
Press RPT until "REPEAT ALL" appears on the display.
Note: To cancel this function, press RPT until "REPEAT ALL" disappears from the display.

Program Play

Programming Disc Play
This feature programs the order in which tracks are played.
1. After CD is loaded, ensure the CD is in stop mode.
2. Press PROG/MEM button of remote control, "PROGRAM" flashes and "00 P-01"
appears on the display.
3. Press or to locate a desired track.
4. Press PROG/MEN button to confirm. "00 P-02" appears on the display.
5. Repeat steps 3 and 4 to program other tracks for your desired sequence. Up to 40
tracks may be stored for programmed play.
6. Press PLAY/PAUSE (
Note:
• To cancel Programmed Play mode before the sequence begins, you may either power
off the unit or open the door.
• When in Programmed Play mode, press PROG/MEM button to cancel the Programmed
Play mode, and the CD plays in normal Playback mode. If PROG/MEM button is
pressed again, you return to the already Programmed Play mode.
Editing Programmed Memory
1. While stopped in programmed play mode, press PROG/MEM button repeatedly until
the desired programed track is reached.
2. Press or to select the track you want to replace the programmed track with.
3. Press PROG/MEM again to confirm.
4. Repeat steps 1- 3 to edit other programmed tracks.
Erasing Programmed Memory
1. While stopped in programmed play mode, press PROG/MEM button repeatedly until
you reach the desired programmed track you wish to erase.
2. Press or to select the track you want to erase, until the shown track selection
appears as "00" on the display.
3. Press PROG/MEM button to confirm.
4. Repeat steps 1 - 3 to erase other programmed tracks.
The programmed track will now be replaced by the track from the next location. The
last programmed location will become "00".
12
CX V3 English
/ ) to play your programmed sequence.
12 14/3/06, 9:48