Control Buttons On The Display - Hitachi UHD7510WHPC Manual Del Usuario

Rear Side (2)
1. Audio Out
2. Audio In
3. Ethernet
4. RJ12 (service use only)
5. Video In
6. YPbPr
7. SPDIF Coaxial Out

Control Buttons on the Display

To turn on the Display: Press the
centre of the joystick in, the Display
will turn on and hold for 5 seconds
until RED LED on the IR receiver
goes out.
To turn the Display off: Press the
centre of the joystick in and hold it
down for a few seconds, the Display
will turn into standby mode.
To change source: Press the centre
of the joystick in, the sources list will
appear on the screen. Scroll through
the available sources by pushing the
joystick up or down.
To change volume: Increase the
volume by pushing the joystick right.
Decrease the volume by pushing the
joystick left.
Note: Main menu OSD cannot be
displayed via joystick.
7
1
2
3
4
English - 7 -
6
5
V+
V-