Britax affinity Guia Del Usuario página 9

Using the Parking Brake
The brake cables located under the stroller basket are factory-set.
Do not attempt to change the adjuster settings.
1. To engage the parking brake:
a. Press down on the rear end of the
brake pedal (marked with a red
strip).
b. Verify that the brake is set.
2. To release the parking brake, press
down on the front end of the brake
pedal (marked with a green strip).
Using the Front Wheel Swivel Lock
1. Always use the front wheel swivel lock
on rough terrain or uneven surfaces
by pushing both swivel lock buttons
down when the wheels are in a forward
position.
12
2. To release the front wheel swivel locks,
push the swivel lock buttons upwards.
Adjusting the Stroller
Stroller Seat
When adjusting the seat angle, always ensure that the recline
adjusters have properly locked before using the stroller.
1. Place both hands on the lower seat
frame and slide the recline adjusters
down to unlock.
2. Holding the recline adjusters in the
unlocked position, adjust the angle
of the seat, then release the recline
adjusters.
13