ION Explorer Extreme Guia De Inicio Rapido

Explorer Extreme Quickstart Guide
Box Contents
Explorer Extreme Microphone with Cable
Microphone Cable Storage Bag
Features
1. Power Button
2. Bluetooth Button
3. Light Button
4. Treble/Bass Control
5. Radio Selector
6. Radio Presets
7. Qi Button
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Explorer Extreme. When the unit is powered on, press the Bluetooth
button to enter pairing mode.
3. In your Bluetooth device's setup screen, find Explorer Extreme and connect.
4. To disconnect pairing while the Bluetooth icon is lit solid, press the Bluetooth
button.
Linking Two Speakers
1. Press and hold the Play/Pause/Link button on both speakers to enter Stereo
Link mode. The word LINK will flash on the display while the two speakers
establish a link. Once a link has been established, the word LINK will appear in
the display.
Note: It may take up to 1 minute to make the connection.
2. Once the two speakers are linked, press and release the Bluetooth button on
either speaker to begin the Bluetooth pairing process. The speaker you use for
Bluetooth pairing will serve as the master speaker. On its Display screen, the
Bluetooth icon will flash to indicate that Bluetooth pairing is in process.
3. Navigate to your Bluetooth device's setup screen, find Explorer Extreme and
connect. When your Bluetooth device is connected, the Bluetooth icon will be lit
solid on the master speaker's Display, and you will be able to play audio from
the Bluetooth device through your two linked speakers.
Note: If you would like to reverse which speaker plays the left channel audio and
which plays the right channel, press and hold the Bluetooth button on either
speaker.
4. To unpair the Bluetooth device, press and release the Bluetooth button on the
master speaker. To disconnect, double press the Play/Pause/Link button on
either speaker.
Outdoor Use and Care
Though Explorer Extreme is water-resistant and able to tolerate splashing water,
please review the tips below to get the best performance from Explorer Extreme:
• Explorer Extreme must only be used outdoors with power outlets or extension
cords that are rated for outdoor use.
• Bring Explorer Extreme indoors during extreme weather.
• Please do not place Explorer Extreme in standing water.
• Please do not connect the power adapter to Explorer Extreme in a wet
environment. Make sure the power input, power adapter, and power outlet are all
completely dry before making any connections.
• WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in
a dry place where they will not be affected by water and cause a risk of electric
shock.
Power/Charging Cable
Quickstart Guide / Safety & Warranty Information
8. Play/Pause/Link Button
9. Tune/Track Buttons
10. Mic Volume Control
11. Master Volume Control
12. Aux Input
13. Mic Input
14. USB Charge Port
15. Speaker Link
Support
Thank you for purchasing the Explorer Extreme. At ION, your entertainment is as
important to us as it is to you. That's why we design our products with one thing in
mind—to make your life more fun and more convenient.
IMPORTANT: For the full User Guide, visit ionaudio.com.
For the latest information about this product (documentation, technical specifications,
system requirements, compatibility information, etc.) and product registration, visit
ionaudio.com.
For additional product support, visit ionaudio.com/support.
Soporte (en Español):
Importante: Descargue la Guía del Usuario completa de ionaudio.com.
Para obtener la información más reciente acerca de este producto (documentación,
especificaciones técnicas, requisitos de sistema, información de compatibilidad, etc.)
y registrarlo, visite ionaudio.com.
Para obtener soporte adicional del producto, visite ionaudio.com/support.
Connecting and Charging
Here are some recommendations for getting the longest life from the internal battery:
• Full charge the battery before using it, and charge the battery completely after
each use.
• If you leave the battery level low and do not charge it for 3 months, it may
permanently lose capacity.
• If the battery fails to charge, contact ION audio at ionaudio.com.
Using the Qi Charging Pad
To wirelessly charge your Qi-compatible device, place it on Explorer Extreme in
the Qi charging area and press the Qi button to enable the Qi charging pad. When a
successful charging connection is made, the Qi LED will slowly fade in and out to
indicate the device is charging.
If the charging area cannot establish a charging connection with a device, the Qi LED
will quickly flash to alert you. Depending on the device, it may be necessary to move
the device to a specific location on the top panel of Explorer Extreme to successfully
connect. This is normal for Qi charging pads.
If the charging area cannot detect any Qi-compatible device, the Qi LED will not be
lit. Press the Qi button again to disable the Qi charging pad.
Using the Radio
Selecting a radio station:
1. Press the Radio button to select FM1, FM2, or AM.
2. Press either of the Tune/Track buttons to select a radio station. To "seek" (jump
to the next available station), hold either button down for a few seconds until it
starts to seek a station.
Saving a radio station as a preset:
1. Press the Radio button to select FM1, FM2, or AM.
2. Press either of the Tune/Track buttons to select a radio station.
3. Press and hold a numeric preset button to assign the current station to that
preset number. The display will show "SAV" to show the station has been saved.
Recalling a saved radio station preset:
1. Press the Radio button to select FM1, FM2, or AM.
2. To use an added preset, press a preset number once lightly to go to the stored
radio station.
Technical Specifications
Output Power: 175 W (peak)
Frequency Response: 43 Hz–20 kHz
Drivers:
Low-Frequency: 10.0" / 254 mm woofer
High-Frequency: 3.0" / 76 mm tweeter
Microphone Type: Dynamic microphone
Radio Frequency Range:
US: 520–1710 kHz (AM), 87.5–107.9 MHz (FM)
Europe: 522–1629 kHz (AM), 87.5–108 MHz (FM)
Japan: 522–1710 kHz (AM), 75.5–108 MHz (FM)
USB Charging Port: +5 V, 1 A
Water Resistance Class: IPX5
Note: Before you first use the product, please
fully charge the battery. Your unit was purposely
shipped with a reduced battery charge to
ensure safe transit.
Use the included power cable to connect the
unit to a power outlet and let it charge for up to
10 hours. This helps ensure the longest life for
your battery.
Battery:
Battery life: Up to 100 hours
Charge Time: 10 hours
Battery Type: 12 V, 7 Ah, SLA
Battery Dimensions:
5.9" x 2.6" x 3.7" / 151 mm x 65 mm x 93.5 mm
Dimensions (width x depth x height):
19.0" x 10.6" x 17.7" / 482 x 269 x 450 mm
Weight: 27.9 lbs. / 12.66 kg