Standalone Configuration; Automatic Mode; Automatic Programs; Automatic Program Speed - Chauvet DJ MotionOrb Manual De Uso

Standalone
Configuration

Automatic Mode

Automatic
Programs
Automatic
Program Speed

Sound Mode

Sound Sensitivity

Custom Color

MotionOrb™ User Manual Rev. 45
Standalone configurations allow the MotionOrb™ to operate without a DMX controller. There
are a variety of Standalone modes and they are powerful tools for making exciting looks.
Never connect a product in a Standalone mode (Auto or Sound) to a DMX chain that
includes a DMX controller. Products in Standalone mode transmit DMX signals that
interfere with the DMX signals from the controller.
Automatic mode sets the MotionOrb™ to run through the currently selected program at a speed
set in the Speed function.
To set the MotionOrb™ to Automatic mode, do the following:
1. Make sure the MotionOrb™ is connected to a power source and not connected to a DMX
controller.
2. Press <MENU> repeatedly until Automatic shows on the display.
3. Press <ENTER>. The MotionOrb™ starts operating in Automatic mode.
Program selects 1 of 30 preset color patterns and changes for the MotionOrb™ to go through in
Automatic mode.
1. Press <MENU> repeatedly until Program shows on the display.
2. Press <ENTER>. The currently selected program shows on the display.
3. Use <UP> or <DOWN> until the desired program shows on the display.
4. Press <ENTER> the MotionOrb™ starts operating in the newly selected program mode.
The Speed setting adjusts how fast the MotionOrb™ goes through an automatic program.
To adjust the speed setting, do the following:
1. Press <MENU> repeatedly until Speed shows on the display.
2. Press <ENTER> and 1–3 also shows on the display.
3. Use <UP> or <DOWN> until the desired speed shows on the display.
Sound mode sets the MotionOrb™ to respond to sounds and music.
To set the MotionOrb™ to Sound mode, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>. The MotionOrb™ begins responding to sounds and music.
· The MotionOrb™ responds only to low frequencies of music such as bass or drums.
· If the MotionOrb™ does not respond to sounds or music increase the sound
sensitivity.
The Sound Sen setting adjusts the sensitivity of the MotionOrb™ microphone.
To adjust the sensitivity setting, do the following:
1. Press <MENU> repeatedly until Sound Sen and a number show on the display.
2. Use <UP> or <DOWN> until the desired sensitivity shows on the display.
Color sets all the orbs to a single color.
To set the MotionOrb™ to a single color, do the following:
1. Press <MENU> repeatedly until Color shows on the display.
2. Press <ENTER>. A color (Red, Green, Blue) shows in the display with 3 numbers under it
and the MotionOrb™ glows in the currently selected color.
3. Use <UP> or <DOWN> to adjust the color value 000–255 (0–100%).
Note: Selecting 000 turns off that color.
4. Press <ENTER> to set the color and scroll through the other colors.
4. Operation
Page 19 of 96