Cleaning And Maintenance - Kasanova SWO000019NOC Manual De Instrucciones

STEAM IRON

CLEANING AND MAINTENANCE

Before cleaning the iron, remove the plug from the socket, pour any remaining
water out of the reservoir, set the steam knob to position "O", stand the iron on
its end and let it cool down sufficiently.
Wipe off the sole piate with a damp cloth and a non-abrasive (liquid) cleaner.
lf any fibres are clinging to the sole plate, use a damp cloth with vinegar to
wipe the sole plate clean.
Never use strong acid or alkali on the sole plate to avoid damaging it.
lf scale has blocked the steam holes, you can remove the scale with a
toothpick, but take care not to damage the surface of the sole plate.
SIMPLE REPAIR METHODS
Problem
Not enough Rotating thermostat diaI incorrectly
heator too much
heat
Leakage or no The thermostat dial has been setto
steam
The steam burst function has been
No steam burst or used too often within a very hort
no vertical steam period. The iron is not hot enough.
Synthetic
Wool
Cotton
Linen
Possible Reasons
or the iron
is unplugged
MIN
MIN
I
MAX
Measurement
Correct Thermostat diaI
in position and check if the iron
is plugged.
Set the thermostat diaI to the
required positi on.
Continue ironing in horizontal
position and wait a while befo-
re using the (vertical) burst of
steam function again
15