Safety Notes; Installation Instructions; Symbol Description; Technical Data - Hansgrohe Raindance E 100 Set 27807000 Instrucciones De Montaje

Ocultar thumbs Ver también para Raindance E 100 Set 27807000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
6

Safety Notes

6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 Children as well as adults with physical, mental and/
or sensoric impairments must not use this shower
system without proper supervision. Persons under
the influence of alcohol or drugs are prohibited from
using this shower system.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
6 The product may not be used as a holding handle. A
separate handle must be installed.
6 Shower hoses are only suitable for a connection
from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms!
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.

Technical Data

Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
4
English

Symbol description

max. MPa
0,1 – 0,4 MPa
max. 60 °C
Assembly see page 32
Do not use silicone containing acetic acid!
With the excentric washer it is possible to
equalize tolerance of the drilling. (see page
34)
Dimensions (see page 31)
Test certificate (see page 34)
Operation (see page 35)
Cleaning (see enclosed brochure)
Spare parts (see page 36)

Publicidad

Tabla de contenido
loading

Tabla de contenido