Use Of The Babyt App - Connecting The Machine - Ascaso BABY T Manual De Usuario

14 - Use of the Baby T app – connecting the
machine
The electronic configuration of the Baby T ZERO and Baby T PLUS models can be
done using a mobile device with the corresponding app. You can download the app
from the Ascaso Factory website or from your usual app store.
Using the app, you can control parameters such as:
• General settings: model, measurement unit, hydraulic connection system,
machine ON/OFF, coffee group and steam boiler.
• Temperature settings: coffee group, steam boiler, bypass and standby.
• Dose/pre-infusion settings: volume and time of the pre-infusion for the selections
available (4 in total), as well as activation of automatic flush using the XL key.
• Programming the machine's automatic off/on switch.
• Statistics: reading and reset to zero of coffee counters for each selection (4) and
the total figures.
To connect with the machine from your mobile device, follow the steps given below:
1. Enable the Bluetooth function on your mobile device.
2. Enable the Ascaso Baby T app.
3. Select the Connect option in the main menu. A list of available devices will
appear. Find the coffee machine under the ASCASOXXXX number, where XXXX
corresponds to the serial number of the machine's Bluetooth module (e.g.
ASCASO0000).
4. Important! The authorisation code for the connection is 8483.
5. Once you are connected, select the Read Machine option in the main menu.
6. When you have finished setting the parameters, select the Send to Machine
option to send them to the machine.
7. Select the Log out option to finish the process.
The app is completely intuitive to use.
22
MANUAL BABY T ENG-ESP_DE 2020 .indd 22 MANUAL BABY T ENG-ESP_DE 2020 .indd 22
23
22/09/2020 16:29:13 22/09/2020 16:29:13