Main Unit - Explore Scientific RDC2002 Manual De Instrucciones

SNOOZE FUNCTION
1. At the set time, alarm signal rings.
2. During the alarm, press the [ SNZ / LIGHT ]
button to delay the alarm by 5 minutes.
3. To stop the alarm, press any other button, ex-
cept for [ SNZ / LIGHT ] button.
4. The alarm will start again at the next alarm
time, unless you turn off the alarm function by
pressing the [ ALARM ] button to display the
alarm time first, then press the [ ALARM ] but-
ton once more until the alarm is set to off.
TEMPERATURE AND HUMIDITY
The indoor temperature is always displayed in
the centre of the screen. To receive outdoor te-
mperature you can connect up to 3 outdoor sen-
sors to the main unit.
Press the [ CH ] button to toggle between Chan-
nel 1-3.
MANUAL MEASUREMENT DISPLAY
1. Press [ UP ] button to display the max. and min.
temperature.
2. Display order: Current values > MAX (highest
values) > MIN (lowest values)
3. When displaying highest or lowest values,
press [ UP ] button to delete all saved values.
BACKLIGHT
Press [ SNZ / LIGHT ] to activate backlight.
6
SPECIFICATIONS

MAIN UNIT:

Dimensions
139 x 22 x 122 mm (L x W x H)
Weight
560 g (Exclude batteries)
Power:
3x AAA (LR03) 1.5V batteries
TEMPERATURE:
Indoor temperature display range:
0°C to +50°C (32°F to 122°F)
Outdoor temperature display range:
-50°C to +70°C (-48°F to 158°F)
HUMIDITY:
Indoor/outdoor humidity range:
20% - 95% RH