Removing The Unit - JVC KD-X176 Manual De Instrucciones

Installation/Connection
Installing the unit (in-dash mounting)
1
2
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Do the required wiring.
(Page 18)
Dashboard of your car
Bend the appropriate tabs to hold
the sleeve firmly in place.
Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the
unit.

Removing the unit

17
ENGLISH