Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and Connection
Installation and Connection
Installing the trim plate
]
Removing the unit
1
]
Remove the trim plate (
) by inserting the
\
two extraction keys (
) as illustrated.
]
\
2
When the lower level is removed, remove
from the upper two catches of the trim
]
plate (
).
The frame can be removed from the top side in the
same manner.
3
Insert the extraction keys (
the slots on each side.
\
4
Lower the extraction keys (
bottom, and pull out the unit halfway
while pressing towards the inside.
\
Be careful to avoid injury from the catch pins on
) deeply into
the extraction key.
5
Pull the unit all the way out with your
hands, being careful not to drop it.
Installing the supplied GPS antenna
GPS antenna is installed inside of the car. It should
be installed as horizontally as possible to allow easy
reception of the GPS satellite signals.
1
Clean your dashboard or other surface.
2
Remove the separator of the metal plate (
3
Press the metal plate (
your dashboard or other mounting surface.
You can bend the metal plate (Å) to conform to a
curved surface, if necessary.
\
) toward the
\
Å
).
Å
) down firmly on
ENGLISH
29
Publicidad
Tabla de contenido
