Removing The Unit - JVC KD-X262 Manual De Instrucciones

INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
18
ENGLISH
Do the required wiring.
(Page 19)
Dashboard of
your car
Bend the appropriate tabs to hold the
sleeve firmly in place.
Installing the unit without mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and
secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the unit.

Removing the unit