ARIETE 1581 Manual De Instrucciones página 14

EN
APPLIANCE DESCRIPTION (Fig. 1)
A Motor base
B Control panel
C Macaroni die
D Lasagna/pappardelle die
E Tagliatelle die
F Spaghetti die
G Brush
H Liquid measuring cup
APPLIANCE ASSEMBLY
ATTENTION: Before using the appliance, it is recommended to clean all removable parts that
will be in contact with food using water and common dish detergent.
- Insert the container (P) into the motor base (A) by slightly pressing it to lock the rear pins and the
front slots in the corresponding holes and the pins situated on the motor base (A) (Fig. 2).
- Place the mixing blade (L) into the container (P) by inserting it into the apposite hole on the motor
base (A) (Fig. 3).
- Insert the pasta extrusion chamber (N) onto the container (P) by aligning the arrow with the sign
. Rotate the chamber (N) clockwise towards the sign
- Screw the kneading nut (M) into the pasta extrusion chamber (N), making sure it perfectly locks in
place into the apposite hole on the mixing blade (L) (Fig. 5).
- Choose the proper die, according to individual needs, and mount it on the chamber (N) (Fig. 6).
- Screw the nut (O) on the chamber (N) to lock the selected die (Fig. 7).
ATTENTION:
Before use, make sure all components are properly mounted on the appliance. When the lid
(Q) is not mounted properly, the appliance does not work.
INSTRUCTIONS FOR USE
- By using the suitable measuring cup (I), pour the necessary amount of flour into the bowl (P), as
indicated on the recipe, without exceeding the max. level (400 g).
- Close the bowl (P) with the suitable lid (Q), by inserting the rear tabs in the keyholes of the motor
base (A); press downwards on the lid rear to lock it (Fig. 8).
- Plug the appliance and press the start button situated on the control panel (B) chosen according
to the required operating mode (see following paragraph). The related indicator light close to the
button itself goes on.
- After having started the appliance, pour the liquids possibly necessary for your recipe through the
upper hole of the lid (Q) by using the appropriate measuring cup (M) (Fig. 9).
- Position a suitable container underneath the die and cut the extruded pasta according to the
required length.
- Eventually keep the prepared pasta in the fridge.
I Flour measuring cup
L Mixing blade
M Kneading screw
N Pasta extrusion chamber
O Nut
P Container
Q Container lid
so as to lock it definitively (Fig. 4).
- 12 -