Technical Data - Seca 334 Manual De Instrucciones

Er:011:
... appears in the display?
The scale is overloaded or the load is une-
venly distributed. Take the load off the scale
or distribute weight more evenly and restart
scale.
Er:012:
... appears in the display?
The scale was switched on with too great a
load on it. Remove load and restart.

Technical data

Dimensions
Depth:
Width:
Height:
Weight approx. 3.1 kg
Temperature range +10 °C to +40 °C
Maximum load 20 kg / 44 lbs
Graduations
Up to 10 kg / 22 lbs:
Up to 20 kg / 44 lbs: 10 g / 0.5 ozs
Accuracy better than ±0.3% / ±10 g
Auto Hold function
Power supply
mains unit (option)
Power consumption approx. 30 mA
8
Accessories
Plug-in mains unit
Use only seca original plug-in mains units
with 9 V or controlled 12 V output voltage.
Commercially-available mains units may
supply a higher voltage than stated and
thus lead to damage to the scale.
Disposal
Disposing of the device
300 mm
Do not dispose of the device in do-
640 mm
mestic waste. The device must be
105 mm
disposed of properly as electronic
waste. Follow the national regulations
which apply in your case. For further infor-
mation, contact our service department at:
5 g / 0.5 ozs
Batteries
Do not dispose of used batteries in house-
hold waste. Dispose of batteries via local
yes
collection points. When buying new sup-
battery/
plies, buy batteries low in harmful substanc-
es which contain no mercury (Hg),
cadmium (Cd) or lead (Pb).
service@seca.com
Warranty
A two-year warranty from date of delivery
applies to defects attributable to poor ma-
terials or workmanship. All moveable parts
- batteries, cables, mains units, rechargea-
ble batteries etc. - are excluded. Defects
which come under warranty will be made
good for the customer at no charge on pro-
duction of the receipt. No further claims can
be entertained. The costs of transport in
both directions will be borne by the custom-
er should the equipment be located any-
where other than the customer's premises.
In the event of transport damage, claims
under warranty can be honoured only if the
complete original packaging was used for
any transport and the scale secured and at-
tached in that packaging just as it was
when originally packed. All the packaging
should therefore be retained.
A claim under warranty will not be honoured
if the equipment is opened by persons not
expressly authorised by seca to do so.
We would ask our customers abroad to
contact their local sales agent in the event
of a warranty matter.