Küchenprofi BBQ DIGITAL EXPERT Manual De Instrucciones página 23

Problem/failure
code in display
---
LLL
HHH
Cleaning
· Wash the temperature sensors with hot water and a
mild detergent and then dry them off thoroughly. Do
not immerse the sensors under water when cleaning,
and do not clean them in the dishwasher.
· Only wipe the transmitter and the receiver with a soft,
slightly damp cloth. Do not immerse any of these
equipments in water or other liquids. Do not clean them
in the dishwasher.
Possible reason
The temperature
sensor is not
plugged in
completely.
The connection
between transmitter
and receiver is
interrupted.
The temperature is
lower than 0°C.
The temperature
sensor has been
damaged by
humidity or
overheating.
The temperature is
higher than 300°C.
The temperature
sensor has been
damaged by
humidity or
overheating.
How to solve
Make sure that the
sensor is plugged
correctly in the socket
of the transmitter.
Switch off and on both
devices. Press and hold
the CONNECT button on
the back of the
transmitter.
Use the thermometer
within the indicated
temperature range
only.
There is a technical
fault.
Contact your local
dealer.
Reduce the
temperature and keep
sufficient distance to
hot surfaces and open
flames.
There is a technical
fault.
Contact your local
dealer.
GB
23