Foot cover must be placed on carry cot as fig. 39 shows. In down part
you can fix it with Velcro straps and in upper part - by using elastic and
buttons (fig.39).
Canopy´s fabric is attached to the handle of carry cot by zippers and to
carry cot by velcro straps. Adjusting the handle positions means adjus-
ting the positions of canipy as well. Canipy can be disassembled from
the carry cot by unfastening the velcro straps and releasing the zippers.
INSTALLING OF THE CARRY COT ON THE STROLLER FRAME
40
FIG. 42
ATTENTION! ALWAYS INSTALL THE CARRY COT IN A FACE TO FACE
MODE. WHILE INSTALLING, PARKING DEVICES MUST BE ENGAGED.
To install the carry cot on the frame, pull both levers, located inside the
frame, in direction, shown in fig. 42. Position it in a face to face mode,
align the carry cot adaptors with the corresponding levers on the frame
(fig.43) and press down until you hear a click and carry cot is fixed (fig.44)
ATTENTION! Make sure that the carry cot is well fixed before each use as
trying to pull it from the frame.
FOOT COVER
CANOPY
FIG. 43
FIG. 44