5
When the flange is in the higher position, the wheel will be blocked. Push down the flange
to allow wheel rotation.
6
Fit the canopy to the stroller, using both side clips on the handlebar. Pull plastic rod down
to fully open it. Secure velcro around the bar. To remove the hood simply operate in the
opposite way. (Fig. 6)
7
Fit the raincover onto the canopy as shown in the picture. Pass the elastic band through
the upper and bottom tubs in order to fasten to the stroller. (Fig. 7)
8
The basket must be fitted to the rear bars of the stroller, using the poppers (8)
9
To adjust the angle of the footrest, push simultaneously the lateral buttons and turn the
footrest up to the desired angle(9)
10
Push side buttons on the handle bar and push them up the to place in the upright position
until it clicks.
Fold down the handlebar by pushing buttons (10)
11
Ensure the canopy is folded back and then push buttons on the handlebar to place handle
in lower position (2A). Lift the primary lock lever to release the stretching system (2B).
Step the lock lever on the left side of the chassis and push the handle down to fold the
stroller (2C), until the safety clip is securely locked (2D).
FOOTREST POSITIONS
HEIGHT HANDLE ADJUSTING
FOLDING THE STROLLER
SWIVEL WHEELS
CANOPY
RAINCOVER
BASKET
5