Adding To Existing Sonos System - Sonos ZonePlayer 120 Guía De Configuración

Sonos ZonePlayer 120 Setup Guide

Adding To Existing Sonos System

Once you've set up your Sonos Multi-Room Music System, you can easily add more Sonos
components any time (up to 32 zones).
If your house has structured (built-in) wiring, you can make a wired connection to the additional
ZonePlayers or ZoneBridges. If you don't have structured wiring, our built-in wireless technology
is ideal for you.
Note: Thick walls, 2.4 GHz cordless telephones, and the presence of other wireless
devices can interfere with the wireless network signals from your Sonos Multi-Room
Music System. If you are experiencing difficulty, it is advisable to relocate the
ZonePlayer, change the wireless channel your music system is operating on, or
make a wired connection (Ethernet cable) either from your router to the ZonePlayer,
or from one ZonePlayer to another (see page 15.) If you are having trouble placing
your units within wireless range of each other, you can go to our Web site at
http://faq.sonos.com/range for more information.
Add a ZonePlayer or ZoneBridge
Note: If you are replacing the ZonePlayer that is currently attached to your router,
first add the new Sonos component to your music system (steps below.) You can
then unplug the wired Sonos component from your router, replace it with the new
one, and move the original component to a new location.
1. Choose one of the following options:
• If you are adding an amplified ZonePlayer, attach desired speakers.
• If you are adding a ZonePlayer 90 or 80, connect it to an external amplified device.
• If you are adding a ZoneBridge, attach the power adapter.
(For help with this step, refer to the Setup Guide packaged with your Sonos component, or
start your Desktop Controller software and select Sonos System Help from the Help
menu.)
2. If you are making a wired connection, connect an Ethernet cable from your router, another
ZonePlayer or ZoneBridge, or a live network wall plate (if you have built-in wiring) to one of
the Ethernet switch connections on the back of the new Sonos component. If you are
making a wireless connection, skip this step.
3. Attach the power cord and plug in the ZonePlayer or ZoneBridge.
9