Playing A Disc; Using Your Recorder; Turning Your Recorder On And Off; Initial Setup Wizard - Insignia NS-1DVDR Guía Del Usario

To replace the batteries:
1 Press the lock tab of the battery holder and
open the battery compartment.
2 Place two AAA batteries in the battery holder,
matching the + and – in the battery
compartment.
3 Close the battery holder.
Caution
• Use only the size and type of batteries
specified.
• Make sure that you follow the correct polarity
as indicated in the battery compartment.
Reversed batteries may damage the remote
control.
• Do not mix different types of batteries together
(for example, Alkaline and Carbon-Zinc) or old
batteries with new ones.
• If the remote control is not to be used for a long
period of time, remove the batteries to prevent
damage or injury from possible battery
leakage.
• Do not try to recharge batteries not intended to
be recharged. They can overheat and rupture.

Using your recorder

Turning your recorder on and off

To turn your recorder on and off:
1 Plug the power cord into the back of your
recorder and into an electrical outlet.
2 Press the POWER button to turn on your
recorder.
3 Press the POWER button again to turn off
your recorder.

Initial Setup Wizard

The first time you turn on your recorder, the
Initial Setup Wizard opens so you can set the
language and clock.
To set up your recorder with the Setup
Wizard:
1 Use / to select a language for the Setup
menu and on-screen display, then press
ENTER.
2 Enter the necessary information for year,
date, and time.
3 Press ENTER to confirm your setting.
4 Press ENTER to exit the menu.

Playing a disc

To play a disc:
1 Turn on your recorder.
2 Press OPEN/CLOSE (
3 Load the disc into the tray, with the label side
4 Press OPEN/CLOSE (
5 To stop the playback, press STOP (
6 The recorder records the stopped point,
7 Press OPEN/CLOSE (
Disc playback features
Buttons
OPEN/CLOSE
( )
PAUSE (
www.insignia-products.com
• / (left/right): Moves the cursor to the
previous or next column.
• / (up/down): Changes the setting at
the current cursor position.
Note
You can reset the Initial Setup Wizard from the
Factory Set option in the setup menu (see
"General Settings" on page 11).
tray.
up.
Playback starts automatically. If playback
does not start, press PLAY (
playback using the HOME menu (see "Using
the Home Menu" on page 11).
depending on the disc.
screen briefly.
Press PLAY ( ) to resume playback (from
the stopped point). If you press STOP (
again or unloaded the disc, (
the screen. If you press PLAY (
recorder starts playback at the beginning of
the disc.
and remove the disc.
Press OPEN/CLOSE (
tray, or press POWER (
closes automatically and recorder turns off.
Note
If parental control are set and the DVD is not
within the rating settings, you must input the
password.
(See "Lock (Parental Control) Settings" on
page 12).
Operations
Press to open or close the disc
tray.
Press to pause playback.
)
Press repeatedly to play
frame-by-frame.
Note: You can also use the
buttons to step backward or
forward while in PAUSE mode.
) to open the disc
) to close the tray.
) or start the
).
appears on the
)
appears on
), your
) to open the tray
) to close the disc
). The disc tray
Discs
All
All
DVD ALL
/
9