Cleaning And Maintenance; Technical Data; Guarantee - AEG MC 4413 Instrucciones De Servicio

Ocultar thumbs

Contenido

100

página de 100

/ 100
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Use the I

SKIP/TUNING

buttons (8/3/4) to select the desired track and then press the

MEM(ORY)/PROG(RAM) button (10/6) again. The display

changes to memory slot P-02.

3. Select the next track with the I

I (SKIP DOWN/UP) key and press the MEM(ORY)/

PROG(RAM) key again. Repeat the procedure until all the

desired tracks are selected. In MP3 format ﬁ rst select the

folder. Press the MEM(ORY)/PROG(RAM) button and then

select the desired track.

4. Press the

II ENTER/PLAY/PAUSE key (14/1). The

playback starts. The ﬁ rst track number selected appears in

the display. The words „CD", „MP3" and „PROG" appear in

the display. Press this button to pause brieﬂ y the playback.

5. Press once the

STOP key (17/2) to stop the playback

while retaining the program. The PROG control lamp goes

out.

6. To resume the playback of the program press ﬁ rst the

MEM(ORY)/PROG(RAM) key once and then the

ENTER/PLAY/PAUSE key.

7. To delete the program (in stop mode) ﬁ rst press the

MEM(ORY)/PROG(RAM) button and then the

button.

The device stops automatically once the entire sequence of

programmed tracks is completed. The PROG control lamp

goes out. The programmed order remains in the memory until

you change to a different mode, remove the CD from the CD

compartment, switch the device off or to standby mode.

It is also possible to combine the programmed tracks with the

REPEAT function. After you have programmed and started the

device, please press the REPEAT/PRE-UP button (16/5) up to

three times and then you can use the functions as described

under „REPEAT".

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in

MP3 format. The device also supports all standard CD types:

CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 200 tracks

can be compressed and stored on these CDs. Your machine

detects an MP3 CD automatically (the total number of tracks

and MP3s appears in the display). If you would like to play one

of these CDs, proceed as described under „Playing CDs/MP3".

Tracks can be programmed as described under „Playing Back

Programmed Tracks".

Please note:

There are a number of different recording and compression

methods, as well as quality differences between CDs and self-

recorded CDs.

Furthermore, the music industry does not adhere to ﬁ xed

standards (copy protection).

For these reasons it is possible that in rare cases there are

problems with the playback of CDs and MP3 CDs. This is not a

malfunction of the device.

05-MC 4413 AEG 65

I (SKIP DOWN/UP)

•

SKIP/TUNING

Model: ........................................................... MC 4413 CD/MP3

Power supply: ........................................................ 230 V, 50 Hz

Output rating:........................................................ 100 W PMPO

Protection class: ...................................................................... ΙΙ

Radio section:

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance with

STOP

the latest safety regulations.

Subject to technical changes without prior notice!

The device supplied by our Company is covered by a 24 month

guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its

accessories ascribable to material or manufacturing defects will

be eliminated free of charge by repairing or, at our discretion, by

replacing it. The guarantee services do not entail an extension

of the life of the guarantee nor do they give rise to any right to a

new guarantee!

Proof of the guarantee is provided by the proof of purchase.

Without proof of purchase no free replacement or repair will be

carried out.

If you wish to make a claim under the guarantee please return

the entire machine in the original packaging to your dealer

together with the receipt.

Defects to consumables or parts subject to wearing as well as

cleaning, maintenance or the replacement of said parts are not

covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee repairs can be carried by the

competent dealer or repair service against the payment of the

ensuing costs.