JF 1300 S2 Manual Técnico De Operación página 17

OPERATION TECHNICAL MANUAL - JF 1300 GRASS HEAD SERIES 2
h) Tighten the screws on the top side of the platform,
indicated with 5, 6 and 7 as Figure 8.
i) Reinstall the belt forage harvester using the first 5
channels of the rotor and pulley belt JF 1300 S2 using
the last three channels of the same pulley, according to
the Figure 9.
j) Make sure align both pulleys, preventing the release
of the belts.
When you finish the coupling, make sure
to put back all the protection covers.
8
6
5
9
7
17