Ups Features - Tripp-Lite AVRT450U Manual Del Propietário

Features

UPS Features

1
ON/OFF Button: When the UPS is on, press this button to turn the UPS off.
2
LED Indicators: Provide current status of the UPS. For a detailed description, refer to
"LED Indicators" in the Basic Operation section.
3
Battery Backup/Surge Protected Outlets: These outlets offer battery backup support
and premium surge suppression for critical devices requiring battery backup support.
4
Surge Protected Outlets: These outlets offer premium surge suppression for critical
devices.
5
USB Communication Port: This port can connect your UPS to any computer for
automatic saves and unattended shutdown in the event of a power failure. Use with Tripp
Lite's PowerAlert
the USB cable included with your UPS. This connection is optional; your UPS will work
properly without this connection.
Note: This UPS System provides basic communication compatibility with most integrated Windows
Macintosh and Linux
®
6
Tel/DSL/Ethernet Line Protection Jacks (SMART550USB2 Model): These jacks
protect equipment against surges over a single phone line or network connection.
Connecting your equipment to these jacks is optional; your UPS will work properly without
this connection.
Note: Not compatible with PoE (Power over Ethernet) applications.
7
Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then reset by pressing
it in.
18-11-060-933853.indb 7
2 1
Software (available as a FREE download at www.tripplite.com) and
®
power management applications.
®
5
7
3
7
6
IN OUT
4
,
®
11/20/2018 8:42:22 AM