Preparing Hot Water; Changing And Saving The Cup Measure; Changing And Saving The Coffee Quantity; Setting The Grinding Texture - AEG CF Serie 2 Instrucciones De Uso

Caution! Danger of burns from the
1
frothing aid! Hold the frothing aid only
by the black seal.
6

Preparing Hot Water

The hot water can be used to pre-heat
cups and for making hot drinks, e.g. tea
or instant soups.
Caution! Danger of scalding when the
1
hot water nozzle is activated! Hot
water or steam output can cause
scalding. Activate the hot water nozzle
only when a container is under the hot
water nozzle.
0 Place a container under the hot water
nozzle. Set the Selection dial for steam
and hot water (Fig. 1, D) to the
position (Fig. 19). Hot water is now
prepared.
0 After you have dispensed the hot water
turn the Selection dial for steam and
hot water (Fig. 1, D) back to the
position (Fig. 19) and remove the con-
tainer.
7 Changing and Saving the
Cup Measure
The coffee machine is factory-set to
standard measures. These measures can
be individually changed to your own
taste and saved for each cup size.
0 Repeatedly press the "Cup Measure"
key (Fig. 3, d) until the cup symbol, for
which you wish to change the measure,
is illuminated.
0 Place the appropriate cup under the
coffee dispenser (e.g. coffee mug).
0 Press and hold the Key for 1 cup of
coffee (Fig. 3, b)
is filled to the desired measure. Release
the key. Your new cup measure is now
saved.
0 Repeat the process if you would like to
change the measures for the other cup
symbols.
8
9
until the cup/mug
The saved measures remain stored
3
when the coffee machine is switched
off. If your coffee cups or your taste
change, you can easily change the cup
measure(s) to your new requirements,
whenever you want.
Changing and Saving the
Coffee Quantity
You can set and save a different coffee
quantity for each cup symbol to your
individual requirements. This can be
done only for use with coffee beans,
not for use with ground coffee.
0 Repeatedly press the "Cup Measure"
key (Fig. 3, d) until the desired cup
symbol is indicated.
0 Then repeatedly press the "Coffee
Quantity" key (Fig. 3, c) until the
desired coffee quantity indicator is
illuminated, and hold the key pressed
(Fig. 20).
After the key has been held for a few
seconds, all the indicators are con-
stantly on – except for the one
selected (Fig. 21). Now release the key.
The coffee quantity is now saved.
0 Repeat the process if you would like to
save coffee quantities for the remain-
ing cup symbols.
The saved quantities remain stored
3
when the coffee machine is switched
off.
Setting the Grinding
Texture
Note! The grinder settings must be
1
changed only while coffee is being
ground. Making adjustments to the
stationary grinder can damage the cof-
fee machine.
0 Press the Key for 1 cup of coffee (Fig.
3, b) to make one cup of coffee.
While the coffee is being ground, use
the Lever for setting grinding texture
g
35