Honeywell Home RTH2300 Guía De Instalación Rápida página 7

5
Connect Wires (typical wiring)
1. Match each labeled wire with the terminal having the
same letter.
REMOVE JUMPER
IF YOU HAVE BOTH
R AND RC WIRES
2. Loosen the terminal screws using a screwdriver, insert
the wires, then tighten the screws.
3. Push any excess wire back into the wall opening.
Labels don't match?
If a wire does not match any terminal designation, see next page.
O/B Y
RTH2300/RTH221
RC R
5
G W
M32155A
69-2448ES—03