Data Transfer To Other Wireless Data Transmitting Devices; Optional: Weighing On A Carpet; Remove The Non-Slip Pads From The Scales Feet - HMM Diagnostics ANT+ smartLAB Operación Manual

profile by pressing the "Set" button and the desired user
through the up and down arrows. After weighing the scale
saves this weight to that user.
The smartLAB
automatically through your weight, which person is currently
standingonthescaleanduseshisuserprofile.Thisautomatic
function requires that you once select the desired user and
weigh yourself after that. Future measurements will be
recognized automatically.

Data transfer to other wireless data transmitting devices

You can connect your smartLAB
the standard protocol of ANT or Bluetooth Smart wireless data transfer.
You can transfer measured weight values automatically and wireless to the
device. Partner devices could be laptops, smartphones, tablets or any other
ANT or Bluetooth Smart-capable device. The communication will be ena-
bled by a gateway* which can be installed on PC, Smartphone or Tablet.
Makesurethatthecorrectprofileisusedwhenweighing.

Optional: Weighing on a carpet

You can use the smartLAB
feet on a carpet. For this please follow these steps:
1. Remove the non-slip
pads from the scales
feet
* For more information on the Gateways please visit www.hmm.info, www.hline-online.com or www.fitmefit.com
fit W Body Analyser Scale recognizes
®
fit W withapartnerdevicewhichfulfills
®
fit W Body Analyser Scale with the extension
®
2. Fit the extension feet
firmly onto the scales
feet. Now you can use
the scale on a carpet.
37