Toa WM-5225 Manual De Instrucciones página 7

11. SPECIFICATIONS
Model No.
Microphone Element
Modulation
Frequency Range
Channel Selectable
RF Carrier Power
Tone Frequency
Oscillator
Maximum Input Level
Maximum Deviation
Audio Frequency Response
Dynamic Range
Battery
Battery Life
Indicator
Antenna
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Note: The design and specifi cations are subject to change without notice for improvement.
• Accessories
Microphone holder (with stand adapter) ........... 1
Screwdriver (for setting) ................................... 1
WM-5225
Electret condenser microphone unit:
Unidirectional
506 – 867 MHz
(506 – 538 MHz, 576 – 606 MHz, and 614 – 698 MHz for USA/Canada,
614 – 698 MHz for Brazil, 865 – 867 MHz for India)
64 channels (the number of channels may differ from country to country)
Less than 50 mW (Factory preset 10 mW ERP)
126 dB SPL
95 dB or more (with WT-5800)
WB-2000 rechargeable battery (option) or AA alkaline dry cell battery
Approx. 13 h (when the WB-2000 rechargeable battery is used)
Approx. 10 h (when the alkaline battery is used)
–10°C to +50°C (14°F to 122°F) (except battery)
ø43.6 x 231.5 mm (ø1.72" x 9.11")
180 g (0.4 lb) (with battery)
Dynamic microphone unit:
Frequency modulation
32.768 kHz
PLL synthesized
±40 kHz
100 Hz – 15 kHz
Power/Battery lamps
Built-in type
30 % to 85 %RH
Resin, coating
ø50 x 229 mm (ø1.97" x 9.02")
205 g (0.45 lb) (with battery)
Storage case .................................................... 1
WM-5265
Unidirectional
132 dB SPL
7