Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OASIS DP
INSTALLATION, USE AND MAINTENANCE MANUAL
Dear Costumer, thanks for choosing this Atlas Filtri product.
1. GENERAL INFORMATION
The indications in this manual apply to models:
OASIS DP STD
OASIS DP PUMP
OASIS DP UV
OASIS DP PUMP-UV
OASIS DP-F PUMP
OASIS DP-F PUMP-UV
OASIS DP is a device intended to process drinking water able to modify its organoleptic and chemical properties, reducing the
saline content while guaranteeing microbiological safety.
Correct use and maintenance permit the reduction of most pollutants such as insecticides, pesticides, fertilisers, hazardous organic
substances, heavy metals, pathogen micro-organisms.
1.1 SYMBOLS USED
GENERAL INFORMATION
➥
Indicates a warning or note on key functions or helpful information.
Pay the utmost attention to text marked with this symbol.
Indicates a manual adjustment that may also require the use or portable equipment or tools.
A measurement must be taken, a signal checked or a visual inspection made.
HAZARD INDICATIONS
Generic hazard, with risk to the user.
Electrical hazard.
PROHIBITION INDICATIONS
Prohibited.
1.2 CONDITIONS OF USE
OASIS DP is not a drinking water maker. Do not use for uses intended for drinking water in the event of originally non-
drinking water or of unknown quality.
➥
Perform periodic routine maintenance to guarantee processed water drinking requirements and maintain the stated
performance levels.
Use only with water with a pH between 6.5 and 9.5.
Observe the use limits indicated on the label.
Keep away from excessive heat and cold: min 4°C (39.2°F) - max 45°C (113°F).
In the event of prolonged disuse, remove the cartridges and membranes and, when reused, insert new ones. After
servicing, let the water run for at least 5 minutes before using it.
|
4
OASIS DP RO
- Reverse Osmosis Units
OASIS DP SANIC STD
OASIS DP SANIC PUMP
OASIS DP SANIC UV
OASIS DP SANIC PUMP-UV
OASIS DP-F SANIC PUMP
OASIS DP-F SANIC PUMP-UV
GB
Publicidad
Tabla de contenido
