Om-Gryphon Configuration; Serial Configuration; Configuration Barcodes - Datalogic OM-GRYPHON Serie Guida Rapida

UK/US

OM-GRYPHON CONFIGURATION

The OM-GRYPHON configuration can be performed in two ways: either by
sending configuration strings from the Host via the RS232 interface or by
reading configuration barcodes with the Gryphon™ M reader.

Serial Configuration

By connecting the OM-GRYPHON to a PC through an RS232 interface cable it
is possible to send configuration strings from the PC to OM-GRYPHON. Using
this method you can also send new configuration strings from the PC to the
reader or upgrade application software onto the Gryphon™ M reader.

Configuration Barcodes

Once you have performed system connection and Gryphon™ M reader
configuration, you can configure the OM-GRYPHON cradle by reading
configuration barcodes. Apply power to the OM-GRYPHON.
For the Gryphon™ M configuration refer to the "Gryphon™M Quick Reference".
To configure the OM-GRYPHON using the Gryphon™ M reader (the one paired
to the cradle with the Bind command), follow the given sequence and the
instructions.
1. Read the OM-GRYPHON restore default code:
2. Among the following interface selection codes, read only the code that
suits your application:
6
Restore OM-GRYPHON default
RS232
PEN
Interface
Interface
DATALOGIC