Programming - Fagor FET-6412WS Manual De Instrucciones

EN 4 / PROGRAMMING YOUR MACHINE
•DESCRIPTION OF THE CONTROL PANEL
Temperature adjustment
Choice of wash cycle
or empty tank
programme
Spin speed adjustment
•CONFIRM, CANCELLING, PAUSE
•Confirm your choice:
— The "Start/Pause" button 6
NB: After programming a delayed start wash cycle, there is no need to press "Start/Pause". The selection will be registered after a few seconds.
•Cancelling:
— You can cancel your selections at any time by turning the selector
This operation can be performed during programming, during the waiting period before the cycle actually starts and throughout the whole washing cycle.
It also cancels the "Children's Safety" system.
•Pause:
— You can also temporarily stop the cycle by briefly pressing the button "Start/Pause"
Important:
This action is not possible during the spin cycle.
For more details on this function, please refer to the section «PROGRAMMING : Adding or removing an item...».
•ACTIVE MEMORY FUNCTION
Your washing machine memorises your washing habits. Every time you start a programme, it records the temperature, the speed and the
options you generally use and suggests these when you switch on.
Important:
hen you start your machine for the first time, it proposes the manufacturer's recommended programme but it will learn your habits after
a few cycles.

•PROGRAMMING

•Programming a washing cycle:
1
— Turn the selector to choose the most suitable programme for the type of fabric to be washed.
NB: Turning the selector to any position other than "
— If you wish, the suggested wash temperature can be changed using button
NB: For a cold wash, change the temperature to "0".
— You can also use button
- modify the suggested spin speed.
- programme drainage for the end of the cycle.
The cycle will finish with a gentle spin at 110 rpm.
- or even select a full drum stop.
Your machine will stop with the tub full of water before the final spin.
— Use the buttons 4 to select any options you wish.
Information:
For each of the selections above, the machine will only allow you to select values or
options that are compatible with the programme selected.
Delayed start selection and setting
2
1
3
4
Options
Children's safety
is used to confirm the program you have chosen.
" provides power to the machine.
3 to:
Start/Pause
5
6
+
1 to " ".
6 .
2 .
28
Information:
All the buttons are touch-
sensitive and therefore do not push in.
In any case, the " " (Start/Pause)
button cannot cancel a programme.
Important:
Before starting your machine,
check that the power cable is plugged
in and the water tap is open .
Also ensure that the drum doors are
closed correctly and the machine's lid
is shut.
During the "End of Cycle" phase , when
"StOP" is lit, any action on one of the
controls (the selector or the buttons)
returns you to "Programming" mode .
As a safety measure, when the cycle is
over, we recommend that you unplug
the power cable and turn off the water
tap.
Display
The machine displays the most suitable
temperature and spin speed for the
programme selected as well as the
length of this programme.
Light(s) for the option(s) selected