Publicidad
Idiomas disponibles
Idiomas disponibles
2. instaLLation
1
Place the moisturiser on a sturdy, even surface.
2 Remove the water reservoir by lifting it up. Screw the filler cap from the bottom of
the reservoir and remove it.
3
Fill the reservoir with suitable water. Only use water with a hardness rating between
40 and 75 mg of calcium carbonate per litre.
4
Tight the filler cap again. Ensure that the cap is tight and does not leak.
5 Replace the water reservoir on the moisturiser.
4
35
Publicidad
Capítulos
