Set Timer; Take Care; Switch Off Timer - Qlima H 130 Instrucciones De Uso

Press control button control button colour
1x
2x
3x
4x
Overview table for switching to the various moisturising settings.
B. SET THE TIMER
The moisturiser has a built in timer that can be set to switch off after 2,4, or 6 hours. The
timer can be set for the lowest, middle and highest setting.
G

TAkE CARE

If the timer function is switched on then the settings can no longer be modified.
Choose the desired setting before activating the timer.
1 Press the control button and keep it depressed (for about 3 seconds) once the moistu-
riser is running, until the control button starts to flash. The timer function is now acti-
vated and the moisturiser will switch off automatically after 2 hours.
2 By pressing the control button again (control button will flash green twice) the moi-
sturiser will be set to switch off after 4 hours.
3 By pressing the control button once again (control button will flash blue twice) the
moisturiser will be set to switch off after 6 hours.
4 By pressing the control button once again (control button will flash red twice) the
moisturiser will default to switch off after 2 hours.
Press control button button flashes 2x
Hold depressed for 3
seconds
Once
Twice
Three times
Overview table for switching to the various moisturising settings.
G
TAkE CARE
Once the timer function is switched on then the settings can no longer be
modified. Choose the desired setting before activating the timer.
C.

SWITCH OFF TIMER

By pressing the control button and holding it depressed for 3 seconds the timer function is
switched off, it will give a short beep.
Red
Green
Blue
-
Red
Green
Blue
Red
setting
Low
Medium
High
Switched off
uitschakeltijd
2 hours
4 hours
6 hours
Back to 2 hours
4
37