Maintenance & Customer Service - Oreck XL COMPACT CANISTER VACUUMS Guia Del Usuario

C
C. Remove used bag and insert fresh
bag. The cardboard rim fits smoothly
into the recessed top. Replace the front
plate and close unit by turning knob
clockwise.
THE WHITE BAG GASKET GLUED IN
THE HOUSING MUST BE IN PLACE
OR UNIT WILL NOT OPERATE
PROPERLY. REPLACE IF NEEDED.
White
Gasket
E N G L
B
6
I S H
REPLACING MICRO FILTER
Stand unit on
its back.
Twist knob and lift
out front plate.
Remove disposable
bag.
Remove old filter
from bottom inside
unit.
Replace with new
filter.
A replacement filter
is supplied in each package of
12 ORECK XL filter bags or you may
order filters separately.
Maintenance and
Customer Service
Your ORECK COMPACT CANISTER
VACUUM is a product of precise
engineering. The motor bearings are
permanently lubricated and should
not be oiled. If you require additional
information or have problems with
your ORECK appliance, you may call
ORECK customer service.
In USA 1-800-989-3535
In Canada 1-888-676-7325
Please specify the model number and
serial/code number which can be
found on the data plate on the back of
the vacuum.
Save your sales or purchase slip.
Should your ORECK appliance require
warranty service in the U.S.A., present
this slip to the Authorized Service
Center as your proof of purchase
date, or, in Canada, call customer
service.unauthorized Oreck
Micro Filter