M-system MGK 600 Instrucciones De Uso página 78

REPLACING THE POWER
SUPPLY CABLE
Use the same type of power supply
cable.
This cable must be connected to the ter-
minal block following the diagram in fig.
6.1.
230 V
L1
Fig. 6.1
Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the
right, considering the characteristics of the models described here, at any time and without notice, to
make eventual necessary modifications for their construction or for commercial needs.
78
PE N(L )
2
FEEDER SPECIAL CABLE SECTION
Type "HO5V2V2-F"
resistance to temperatures of 90°C
230 VAC 50 Hz
2
3 x 0,75 mm