Operating Instructions; Vga And Hdmi Function; Menu "Color; Menu "Adjust - Braun DigiFrame 2050 Instrucciones De Manejo

BN_DF2050_GB.qxd 06.05.2011 15:47 Uhr

3 Operating instructions

• Switch into signal source
When the OSD is inactive, press "SOURCE" key to
change the source input (DPF,HDMI,VGA) .
• To Display and Select the OSD Functions:
Pressing OSD key and then pressing
ect the different OSD control option.
• Adjust the value of every menu item:
When the icon you will adjust is highlighted, pres-
sing OSD key to make it to be selected, and then
pressing or to change the value of the selec-
ted OSD control option. After adjusting values,
press "EXIT" to exit current OSD control option, the
monitor will automatically save the changes.

4 VGA and HDMI Function

OSD MENU INTRODUCTION
"Color"menu:
• Brightness: Adjust image brightness.
• Contrast: Adjust image contrast.
• Color Temp: Adjust image color temperature
Seite 3
E N G L I S H
or to sel-
"Color Temp" submenu:
• 6500K: standard colour
• 9300K: cool colour
• User: You can adjust the values of color gain
(RED,GREEN OR BLUE). After setting ,Press
EXIT or OSD Key to exit
"Adjust"menu:
• Auto Config: To adjust the geometrical parame-
ters automatically for optimal display status.
• H Position: Adjust the horizontal position of the
image.
• V Position: Adjust the vertical position of the
image.
• Phase: To decrease the horizontal interference.
• Clock: To adjust the horizontal size of the image.
After setting, press EXIT or OSD key to exit.
9