V- Cleaning And Maintenance - senya Juicy Delight Manual De Instrucciones

IV- TROUBLESHOOTING GUIDE
Problem
Cup assembly does not rotate properly
on the Main machine.
The juicer does
The food is cut in too big pieces
not work/start
Add too much food
Whether to use for a long time
The juicer stops
while working
The cup assembly is detached from
normally
the Main machine

V- CLEANING AND MAINTENANCE

1. Unplug it before cleaning ,Never immerse the Main machine into water ,Wipe the outside
with a clean,damp cloth.
2. Take care when handing the Agitator unit -the blades are extremely sharp.
3. Empty the cup, fill it will water and a little washing-up liquid(not exceed 500ml).put the cup
back onto the machines and turn the switch on about 15 seconds.Let it achieve the purpose
of cleaning .
4. Wash the detachable parts in warm soapy water with the cleaning brush or a soft cloth. Rinse
and dry them thoroughly.
5. When you are not using the product, store your device and accessories in a dry and safe place.
VI- TREATMENT OF THE ELECTRIC AND ELECTRONIC
APPLIANCES AT THE END OF LIFE
Application in the countries belonged to the European Union and in other European countries
which have a selective collect system. This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office or your household waste
disposal service. The packaging material is recyclable. Eliminate the packaging in an environmentally
friendly way and make it available to the recycling collection service.
Cause
15
Solution
Check that the device is plugged in properly
Check that all the parts are assembled correctly
cut into small squares of about 1 cm*1cm*1 cm
Do not exceed the rated capacity of the cup
Wait for the machine to cool completely
Check that all the parts are assembled correctly