Status Calls - Tait T2040II Guia Del Usuario

Sending a
Status
Message
Receiving a
Status
Message

Status Calls

Status calls permit the rapid exchange of simple
messages without voice conversation. Your radio can
have messages such as "En route", "At lunch" and so on
preprogrammed.
To select and send a status message:
1 Press the Status (
) scroll keys to select an appropriate message.
2 To send the message to your despatcher, press the
Hash ( ) key.
3 To send the message to any other party, press the
Star ( ) key, and then:
• Dial the identity number using the keypad, or
• Select an alphanumeric label for the call.
4 Press the Hash (
When you receive a status call, your T2040
automatically enters the Call Queuing mode.
The status message value shows on the left of the
display and the caller's identity on the right.
If the status message corresponds to a label which is
preprogrammed into your radio, the indicator beside the
Alphanumeric (
• Press the Alphanumeric (
) key and use the (
STAT
) key to make the call.
) key flashes. To view the label:
) key.
/
II
15
English