Call Queuing - Tait T2040II Guia Del Usuario

Setting
Queuing On
Handling Saved
Calls
Cancelling Call
Queuing
Do Not Disturb
14
English

Call Queuing

If you need to leave your T2040
have it save incoming calls as call-back messages for
you to return later.
To set call queuing on and have all calls except "group,
PABX and PSTN" calls queued:
• Press the Despatcher (
beside it illuminates.
When you return to your radio it displays the number of
calls received and the identity of the first caller. You
may:
1 Return the displayed call by pressing the PTT key.
2 Discard the call by pressing the Clear (
3 Scroll to another message using the Up and Down
( /
4 Make a new outgoing call as normal.
You may restore the radio to normal operation by
pressing the Despatcher (
indicator beside it extinguishes.
The radio will now alert you normally when a call is
received. If you still have calls saved in the queue, they
are preserved and you may recover them at any time by
turning call queuing back on.
You may set your T2040
whilst allowing you to make calls out normally. The
radio will display QUIET and callers will be given the
"unavailable" response.
• To set 'Do Not Disturb', dial *49#.
• To cancel, dial #49# or press the Clear (
and the QUIET message is removed from the display.
II
unattended, you may
) key until the indicator
) keys and handle it as above.
) key again until the
II
to reject all incoming calls
) key.
) key,