Echo PWE-1800 Manual De Instrucciones página 12

Garden Hose Adapter
• Install the garden hose adapter (GHA) and quick connect filter. It is made up of two separate pieces. (1) A
clear plastic adapter with a screen filter (about 3 inches long) and (2) collar attachment (Fig. 13).
Garden Hose
Adapter (GHA)
• Attach the garden hose adapter to the end of the garden hose (Fig. 14).
• First, remove the plastic shipping cover on the water inlet on the front of the power washer on the right
side. Attach the clear quick connect filter to the power washer (Fig. 15) hand tight is fine. Slide the garden
hose adapter collar onto the clear adapter (Fig. 16), it will "click" into place.
• The water is now connected to your power washer. Turn on water.
• To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter.
Note: this can be done at any time. Water will not come out of the garden hose as the collar has a water stop
check valve. Water will only flow from the garden hose when it is connected to the clear adapter.
• You have now completed the assembly of your ECHO POWER WASHER and are now ready to begin using
your electric power washer. Read and observe all safety instructions.
12
ECHO PWE-1800 Pressure washer manual 2015.indd 12
QC - Clear
Adapter
Fig. 13
Fig. 15
(GHA)
Fig. 14
Fig. 16
2016-04-12 8:26 AM